Tap for one step, hold to move through the range quickly. The heater then cycles to hold the set point.
The 800ml platform in a squared body — four keys, a live readout, and a lid you lift off with one hand.
SW8 is the squared member of the 800ml family. The housing keeps the W5 bench footprint and stands taller to take the deeper pot, so it occupies the same counter space while holding close to twice the wax of a 450ml unit. Temperature is set with two keys and shown as a live sensor reading on the front panel — there is no knob to turn and no scale to interpret. The square lid comes off in one piece, and the wide mouth takes hard wax beads, a matching 800ml can, or an optional aluminium insert can that lifts out for cleaning. Matte black and pearl white are standard; the silicone bowl and insert can are quoted as accessories.
The housing follows the W5 cabinet — same base, same wrap-around seam, same squared lid — but stands taller to take an 800ml pot. Buyers who already stock the 450ml unit can add the larger capacity without rebuilding shelf planning or bench layout.
One housing family, two capacities: the difference is pot depth, not width.
Two keys set the target; the panel shows the temperature the sensor is reading, continuously. The same strip carries a °C / °F key and a key lock, so one build serves markets that quote temperature either way, and the panel cannot be knocked out of setting in transit or on a retail shelf.
Chip-regulated control cycles the element around the set point instead of running flat out.
The square lid lifts off in one piece and can be set down flat — no hinge to stress, no lid hanging over the pot while the operator works. It is a smoked grey moulding with a recessed centre, so the melt is visible at a glance without lifting it. The wide mouth takes beads, a matching can, or the optional aluminium insert can, which lifts out with the cooled wax still in it.
A white silicone bowl is available for salons that prefer to melt in a separate liner.
The panel is a sealed membrane strip rather than a rotary knob: two keys to set the target, a key that switches °C / °F and locks the panel, and a separate power key. The readout shows what the sensor is reading, so the operator works from the wax temperature rather than from a dial position.
Tap for one step, hold to move through the range quickly. The heater then cycles to hold the set point.
The number is what the sensor is reading, not the setting — a heater that has not caught up yet is visible at once.
One build reads in either unit; the lock stops the setting changing in transit or on a retail shelf.
On and off without walking the setting back down — which matters at the end of a shift.
Panel layout is identical on both builds. The readout is a live sensor value, not a dial position — it does not establish that all of the wax is at the same temperature.
SW8 and SW1 hold the same amount of wax and share the 800ml can format. What changes is how the machine is built and how it is operated — which is why they suit different shelves.
| SW8 | SW1 | |
|---|---|---|
| Body | Squared housing on the W5 footprint, raised for the 800ml pot | Cylindrical body, 800ml, three control variants on one housing |
| Control set | Four-key membrane panel — + / −, °C / °F with key lock, power | SW1A touch panel · SW1B knob + display · SW1C knob + indicator |
| Display | Live sensor temperature, °C / °F switchable | Live sensor temperature (A / B); indicator light only (C) |
| Pot | 800ml fixed non-stick, wide mouth | 800ml fixed non-stick, Ø102 × 105mm |
| Cover | Smoked square lid, lifts off in one piece, centre recess | Smoked see-through round cover |
| Wax formats | Beads, matching 800ml cans, optional aluminium insert can | Beads, matching 800ml cans, sugar wax |
| Silicone bowl | Optional accessory, quoted per order | Included with every unit |
| Power | 200W · wide voltage 100–240V | 200W · wide voltage 100–240V |
| OEM MOQ | 1,080 pcs | 1,080 pcs |
| Best fit | Retail, e-commerce and price-led distribution | Salon chains and multi-tier brand programmes |
Both accept matching 800ml cans; check physical can dimensions when changing suppliers. SW1 is also offered with three control sets so one product family can cover entry and premium listings — see the SW1 page.
Studio views of the standard matt black and pearl white builds, with the lid fitted and lifted, so buyers can see the pot mouth, the fascia and the proportions before sampling.
The pot holds 800ml and takes hard wax beads directly, a matching 800ml soft wax can, or the aluminium insert can. The insert is the practical choice where several waxes run in one week: lift it out with the cooled wax, drop a clean one in, and the heater goes back into service without scraping.
Deliberately lean: the heater with its lid, a detachable lead, the manual and a neutral retail box that is marketplace-ready. The insert can and the silicone bowl are quoted separately, so the unit price is not carrying accessories a distributor will not use.
Accessories quoted separately: aluminium insert can, white silicone bowl. Confirm quantities in the quotation.
Standard orders run on stock colours and neutral packaging; brand-level customization is confirmed in the quotation before production.
1,080 pcs — matte black or pearl white, neutral packaging, per-market plug
From 2,160 pcs — Pantone matching on the housing and the lid
Body logo silk-screen, fascia artwork, gift box design and manual localization
CE / FCC / RoHS / LVD / EMC declarations issued per model and destination market
After-sales process and spare-part planning are agreed before the order is placed.
Values below refer to the standard configuration. Confirm the final specification, accessories and electrical configuration for your destination market in the quotation.
| Brand | BeauTome |
|---|---|
| Model | SW8 |
| Pot capacity | 800ml — fixed non-stick pot, wide mouth |
| Wax compatibility | Hard wax beads, matching 800ml cans, optional aluminium insert can |
| Temperature range | 30–165°C, chip-regulated |
| Controls | Four-key membrane panel: + / − set, °C / °F with key lock, power |
| Display | Live sensor temperature, °C / °F switchable |
| Heating power | 200W · wide voltage 100–240V (one build, plug fitted at packing) |
| Heating element | PTC — bottom-mounted, matched to the wide-voltage board |
| Power connection | Detachable figure-8 (C7) lead — US / EU / UK / AU plug head |
| Lid | Smoked grey square lid, lift-off, centre recess |
| Pot options | Fixed non-stick pot; optional aluminium insert can and white silicone bowl |
| Standard colours | Matte black / pearl white |
| OEM MOQ | 1,080 pcs |
| Custom colour MOQ | 2,160 pcs |
| Packaging | Neutral export carton standard; OEM retail box and artwork per market |
| Dimensions | W5 footprint, body raised for the 800ml pot — confirmed on the approved drawing |
Specifications are provided for evaluation and may be updated as the product is improved. The approved specification sheet for your order governs production, inspection and documentation.
Suitability depends on the wax or gel system used, room conditions and operator technique. Validate the finished combination during sample evaluation.
Both hold 800ml and both take matching 800ml cans. SW8 is a squared cabinet on the W5 footprint with a four-key membrane panel and a solid lift-off lid; SW1 is a cylindrical body offered with three control sets — touch, knob with display, and knob with indicator. SW1 ships with a silicone bowl, on SW8 the bowl and the aluminium insert can are optional. Choose SW8 for retail and price-led distribution, SW1 where a single family has to cover several price tiers.
Yes — the pot is dimensioned for the standard 800ml can format and also melts hard wax beads directly. Confirm the physical can dimensions with your supplier before switching containers; nominal volume alone does not guarantee a fit.
A chip regulates the element around the set point. Set the target with the + / − keys; the readout shows the temperature the sensor is reading, not the setting. That reading does not establish that all of the wax is at the same temperature — follow the wax instructions and check the wax itself before application.
Partly. SW8 uses a smoked grey square lid with a recessed centre: the melt is visible through it in normal light, but it is not a clear viewing window. The lid lifts off in one piece and sets down flat. SW1 uses a fully see-through round cover for salons that want to watch the melt without lifting the lid.
No — on SW8 the white silicone bowl and the aluminium insert can are optional accessories quoted per order. SW1 includes the bowl with every unit. Specify quantities with your quotation.
OEM MOQ is 1,080 pcs in matte black or pearl white; custom colours start at 2,160 pcs. Send the quantity, destination market, voltage and plug type, packaging requirement and accessory quantities — we reply with pricing, lead time and the documentation available for this model.
The cylindrical 800ml platform — touch, knob or indicator control on one housing.
Two pots, two waxes, one workstation — built for back-to-back service.
Single pot, digital control — the compact member of the salon range.
Six-colour entry warmer for marketplace kits and starter bundles.
Certificate excerpts are shown with certificate numbers and holder details withheld to prevent misuse, while the model list stays visible for verification. Full documents are referenced in the quotation.
Choose a quotation or a sample request. Share the quantity, destination market, plug type and packaging needs — we come back with pricing, lead time and the documentation available for this model.