Precision hair removal for delicate areas — nose, ears and brows.
PW6 is built around one job: precise, small-area waxing. The ultra-compact body melts a 20ml portion of hard wax for nose, ear and brow routines, powered over USB-C with graphene bottom heating — and ships as a complete retail kit with wax, sticks and manual included.
The 61 × 61 × 42 mm body and 20ml pot exist for one reason: nose, ear and brow work needs a small, controlled wax portion — not a salon pot scaled down. The single power switch keeps operation to heat, dip and remove.
Wax temperature and set times follow the wax manufacturer's instructions; check the wax before application.
The fixed metal pot carries the heating, while a removable silicone pot sits inside it. The silicone pot lifts out for cleaning and can be ordered as a spare, so neither cleaning nor replacement takes the heater out of service.
Allow the heater and wax to cool before removing the silicone pot.
A graphene heating element at the base of the pot melts the wax portion from below. PW6 is powered over USB-C: an on-board power-management chip negotiates PD/QC protocols and boosts voltage to hold the full 18W heating power, so the heater works with wall adapters, power banks and laptop ports — no mains voltage rating to worry about.
USB-C input 5V2A / 9V2A / 12V1.67A. A USB-C connector does not by itself guarantee full power; confirm the adapter output for fastest heating.
The standard configuration includes the heater, a USB cable, an English manual, a 50 g pouch of B1 classic white wax beans, 10 nose sticks and 10 small wax applicators. Quantities, shell colour, packaging and artwork are all open for private-label discussion.
Nose, ear and brow hair is different from body hair: the areas are small, curved and close to sensitive skin. PW6 is sized and temperature-controlled for exactly this kind of detail work — melt a small portion, apply with a fine stick, remove in one piece.
Add a portion of hard wax beans to the pot and switch on. The 18W graphene element heats from the bottom; the indicator shows when the wax is workable.
Dip the applicator into the melted wax and let the first drops flow off, so the wax on the stick is warm but not hot.
Insert into the nostril or apply along the area, avoiding pressure on the skin. Let the wax set until it is firm but still flexible.
Pull the set wax out briskly — hairs come away with it — then clear residue with a post-wax wipe or oil.
Application technique, wax temperature and set times follow the wax manufacturer's instructions. Suitability for a given area and skin type should be validated before market launch; the statements above describe typical use, not results.
Dome cover, ABS shell, silicone pot, metal pot and graphene heating base — the structure behind the routine.
The standard PW6 kit ships complete for at-home nose, ear and brow waxing, so your retail package is ready from the first sample. Item quantities can be re-configured for your market, and every component is open for private-label branding.
Quantities are configurable — wax pouch count, stick counts and pack layout can be adjusted per order; custom colors require 1,080 pcs.
Values below refer to the standard configuration. Confirm the final specification, accessories and electrical configuration for your destination market in the quotation.
| Model | PW6 mini wax heater |
|---|---|
| Size | H 41.8 × W 61.3 mm, ultra-compact |
| Capacity | 20 ml pot (approx. 10 g of wax) |
| Inner pot | Ø 40 mm, depth 20 mm (fixed metal pot) |
| Silicone pot | Ø 36 mm × 20 mm, removable |
| Power connection | USB-C (removable cable) |
| USB-C input | 5V⎓2A / 9V⎓2A / 12V⎓1.67A |
| Heating power | 10W–20W per PD/QC negotiation; chipset boosts voltage to hold 18W |
| Power management | On-board chip; PD & QC protocols; works with wall adapters, power banks and laptop USB ports |
| Temperature range | 50°C – 120°C, fully touch-controlled |
| Temperature sensing | NTC real-time detection with chip-based precise control |
| Heating element | Graphene bottom heating; fast thermal conversion |
| Working modes | Dual mode: powered heating, plus cordless insulation mode (2–3 minutes of usable wax after unplugging) |
| Indicator | Red = heating, green = ready |
| Typical heat-up | Approx. 8–13 minutes depending on adapter output |
| Cover | Transparent dome cover |
| Shell colors | Bright black and bright white; custom colors available |
| Main applications | Nose, ears, brows and small facial areas |
| Standard kit | Heater ×1, USB cable ×1, English manual ×1, B1 wax 50 g pouch ×1, nose sticks ×10, small applicators ×10 |
| MOQ | 1,080 pcs |
| Custom-color MOQ | 1,080 pcs |
Specifications are provided for evaluation and may be updated as the product is improved. The approved specification sheet for your order governs production, inspection and documentation.
PW6 is designed for precision waxing of delicate areas — nose, ears, brows and small facial zones. The 20ml pot and ultra-compact 61 × 61 × 42 mm body are sized for small wax portions rather than body waxing.
Melt a portion of hard wax beans, dip the plastic nose stick, apply inside the nostril, let the wax set, then remove it in one piece with the hairs attached. The kit includes nose sticks sized for this technique.
Yes. The standard kit includes the heater, one USB cable, an English manual, a 50 g pouch of B1 classic white hard wax, 10 nose wax sticks and 10 small applicators. Quantities and pack layout can be re-configured for your market.
PW6 is powered over USB-C — there is no AC 110V/220V rating. The on-board power-management chip negotiates PD and QC protocols (5V2A / 9V2A / 12V1.67A, 10–20W) and boosts voltage to hold the full 18W heating power, so it works with wall adapters, power banks and laptop USB ports.
MOQ is 1,080 pcs, custom colors included. Specify your destination market, kit configuration and packaging when requesting a quotation.
Real trial photos: B1 classic white wax melting to a workable texture in the PW6 pot, dipped and ready for application.
Miniature size, infinite variety — a hero wax warmer for beauty brands.
Mini 250ml body, touch or knob control — made for delicate-area waxing.
One 450ml can-wax platform — three control configurations for three price tiers.
Certificate excerpts are shown with certificate numbers and holder details withheld to prevent misuse, while the model list stays visible for verification. Full documents are referenced in the quotation.
Choose a quotation or a sample request. Share the quantity, destination market, plug type and packaging needs — we come back with pricing, lead time and the documentation available for this model.
