Vision-guided UV/LED curing for professional nail services.
V2 is a camera-guided UV/LED curing lamp built for professional nail services. A 2MP camera reads hand position and nail contours, on-device AI turns that reading into zone-level light control, and a 5.5-inch touchscreen keeps the whole cycle in view — 136 dual-wavelength LEDs, progressive output and maintenance alerts in one compact 24 × 24 × 11.5 cm body.
A 2MP 1080P camera detects hand position and nail contours. On-device processing then selects active LED zones according to detected nail placement — capture hand position, identify nail contours, adjust the lighting zones.
The listed 0.2-second detection time depends on operating conditions. It is not a curing time or a measurement of gel cure completion.
Energy output gradually increases during the curing cycle with the aim of managing heat build-up, giving technicians a defined output-control approach to evaluate with their gel products.
Progressive output does not guarantee pain-free curing. Gel formulation, layer thickness and service conditions affect the experience.
Front and side arrays use 136 dual-wavelength LEDs operating at 365–370nm and 395–400nm, helping you evaluate the lamp against your gel-system requirements.
Dual wavelengths alone do not establish universal gel compatibility. Establish compatibility during sample testing.
A lamp can still light up while its output changes over time. Internal light-output monitoring and light-decay alerts prompt equipment checks when the configured threshold is reached.
This is a maintenance prompt, not a measurement of whether gel is fully cured. Confirm the alert threshold for your configuration.
The 5.5-inch HD touchscreen provides a 1280 × 720 control surface, with a choice of 29 interface languages for everyday operation across multilingual salon teams.
Values below refer to the standard configuration. Confirm the final specification, pack sizes and labelling for your destination market in the quotation.
| Model | AI Smart Nail Lamp V2 |
|---|---|
| Operating system | Linux embedded OS |
| Processor / Memory | 1.2 GHz CPU / 128 MB RAM |
| AI computing | 0.5 TOPS dedicated NPU |
| Camera | 2MP, 1080P HD |
| Listed detection time | 0.2 seconds; subject to operating conditions |
| Light control | Camera-guided active LED zones |
| LED configuration | 136 dual-wavelength LEDs; front and side arrays |
| Wavelength bands | 365–370nm and 395–400nm |
| Output control | Progressive energy delivery during the cycle |
| Maintenance | Internal light-output monitoring and light-decay alerts |
| Touchscreen | 5.5-inch HD; 1280 × 720 |
| Interface languages | 29; confirm required language set |
| Connectivity | Dual-band Wi-Fi; 2.4 GHz + 5 GHz |
| Battery option | 6000 mAh Li-ion; optional configuration |
| Dimensions | 24 × 24 × 11.5cm |
| Net weight / no battery | 1707 g |
| Net weight / with battery | 1850 g |
| In the box | AI Smart Nail Lamp, dedicated AC adapter & USB-C cable, multilingual quick-start guide and manual |
| MOQ | 500 pcs |
Specifications are provided for evaluation and may be updated as the product is improved. The approved specification sheet for your order governs production, inspection and documentation.
Suitability depends on the wax or gel system used, room conditions and operator technique. Validate the finished combination during sample evaluation.
The camera detects hand position and nail contours, and on-device processing uses that information to control active LED zones. The listed detection time is 0.2 seconds, subject to operating conditions — a detection specification, not a curing time.
The lamp has 136 LEDs with wavelength bands of 365–370nm and 395–400nm. Compatibility should be established with the intended gel system, layer thickness and curing cycle. These optical specifications alone do not establish universal gel compatibility.
The controller ramps energy output during the cycle with the aim of managing heat build-up. It is a heat-management feature, not a guarantee of pain-free curing.
BeauTome offers OEM/ODM discussions covering colors, packaging, manuals, interface branding and market-specific configurations. MOQ is 500 pcs; customisation scope is agreed per project.
Certificate excerpts are shown with certificate numbers and holder details withheld to prevent misuse, while the model list stays visible for verification. Full documents are referenced in the quotation.
Two clips of the same production unit, straight from a salon table. Nothing is staged and nothing is added in post: what the camera sees through the tunnel is what the controller sees.
Both clips are silent by design. The panel display in the second clip is the standard firmware build; the language and button set follow the destination market.
Choose a quotation or a sample request. Share the quantity, destination market, plug type and packaging needs — we come back with pricing, lead time and the documentation available for this model.
